Halfen Hta and Hza Cast-in Channels

HALFEN - Introduction - HTA - Cast-In Channels - Fixing ...

Our HTA-CE Plus cast-in channels have set new standards: thanks to outstanding engineering and multiple optimized details we now have new high performance HALFEN Plus-channels. The new profiles HTA-CE 40/22P and HTA-CE 50/30P are approved with ETA-09/0339 and have CE-marking. Easy and efficient planning is ensured with the HALFEN HTA-software.

Learn More

HALFEN - Software - HTA - Cast-In Channels - Fixing ...

HTA-CE P HALFEN Cast-in channels with additional load capacity Warranty This calculation programs and CAD libraries are products of Halfen GmbH, Langenfeld, Germany.

Learn More

HALFEN - Introduction - HZA - DYNAGRIP Cast-In Channels ...

DYNAGRIP HALFEN Channels are a new development for applications with high loads, where the channel is cast in vertically. The special toothed channels guarantee a positive mechanical connection, additionally the HZA DYNAGRIP HALFEN Channels can safely absorb fatigue-related stress ranges of up to 15.0 kN, with a number of cycles of N = 2x10 6.They therefore fulfil all the requirements for the ...

Learn More

PDF Halfen Cast-in Channels

2 HALFEN Channels HZA 29 - Application examples 30 - Product range 31 - HALFEN Bolts HZS 32 n o i t a l u c 6 l 3 a - -C 2 3 - Dynamic loading 37 3 HALFEN HGB Rail fixings 38 - Application examples 39 - General 40 - Mateiarls / Coosrr oin poter ocitn 41 ... HALFEN CAST-IN CHANNELS HTA-CE General

Learn More

PDF HALFEN Cast in Channels HTA HTA-US-09/16 HALFEN HZA ...

Instructions HALFEN Cast in Channels HTA HTA-US-09/16 HALFEN HZA DYNAGRIP® Toothed Anchor Channels Page 2/4 3.1 A 3. After concreting and striking the formwork 3.1 Remove fi ller using an appropriate tool, e.g. a screwdriver. 2.4 Securing HALFEN Anchor Channels to metal pour stops 1. Slotted pour stop: Pour stops at HALFEN Anchor Channel ...

Learn More

PDF HALFEN Cast-in channels - Technical Product Information

HALFEN HTA-CE Cast-in channels, cold-rolled Apart from excellent adjustability, HALFEN Cast-in channels save considerable installation time. The result; faster construction and therefore reduced overall cost.

Learn More

PDF HTA-CS 10-E - Ancon Australia

disposal plants or other curved buildings, the HALFEN cast-in channels HTA-CS and HZA-CS are always a save and reliable solution in all anchoring challenges. Minimum bending radii HALFEN cast-in channels Application sample: curved cast-in channel in supply tubbing Construction site storage of HTA-CS 52/34 h L L R a R i outer profile slot inner ...

Learn More

PDF HTA & HZA HDG Anchor Channels Declaration v2 - HALFEN

HTA & HZA HDG Anchor Channels by HALFEN Gmbh Health Product Declaration v2.1 created via: HPDC Online Builder CLASSIFICATION: 01 73 23 PRODUCT DESCRIPTION: HTA-CE(HTA) HZA Anchor Channel - The product portfolio of HALFEN cast-in anchor channel systems comprise cast-in anchor channels type HTA-CE (HTA), and type HZA, with corresponding hook ...

Learn More

HALFEN Anchor Channels | Ancon Australia

HALFEN HZA Toothed Anchor Channels. HALFEN HZA Toothed Anchor Channels. Ancon also offers HALFEN HZA Toothed Anchor Channels for applications that require load capacity in the direction parallel to the channel axis.. The profiles HZA 53/34 and HZA 38/23 with welded anchors are approved by the Evaluation Service of the International Code Council (ICC-ES) for applications in seismic conditions.

Learn More

HALFEN Cast-in channels Power Solution

HALFEN HTA-CE and HZA Cast-in channels HALFEN HZA-PS Cast-in channel Expert Report Large concrete cracks up to 1.5 mm Concrete cracks up to 0.3 mm Standard application For applications in normal concrete constructions such as office buildings, schools, industrial buildings or in non-safety relevant areas of nuclear power plants HALFEN HTA-CE ...

Learn More

HALFEN Cast-In Channels - HALFEN - PDF Catalogs ...

HALFEN C AS T-IN CHANNEL S HTA -CE Application Examples CURTAIN WALL CURTAIN WALL HTA-CE Channels 2 Fixings for Curtain-wall façades Fixings for Curtain-wall façades LIFTS/ELEVATOR FIXINGS 4 Seat fixings, St. Jakob-Park, Basel NOISE BARRIERS Fixing guide rails with HALFEN Channels Curtain Wall Fixings of noise barriers to concrete posts UTILITY TUNNELS Fixings for drainage systems Utility ...

Learn More

PDF HALFEN CAST-IN CHANNELS - bruckebuild.com

HZA Channels Accessories HALFEN HTA-CE CAST-IN CHANNELS General information Fire-resistance/ Material fatigue Quality is the outstanding feature of our products. HALFEN materials and products are subjected to the most stringent quality control procedures.

Learn More

HALFEN - Brochures

2010-05-11 - HALFEN Cast-In Channel HZA 53/34 Dynagrip Technical Product Information (ti-hza_53-34-e.pdf - 499.15 kB) 2020-01-10 - HALFEN Cast-In Channels Technical Product Information

Learn More

PDF HALFEN HTA, HTA-CE, HZA, HZA Dynagrip

HALFEN Cast-in channels HTA and HZA 2.1 1.1 1.2 Note: The HTA-CE channels also fulfi l all the requirements stipulated in the German Approval No. Z-21.4-34 for HTA channels and can therefore be used accor-dingly. Type identifi cation: on the inside of the profi le back. Additionally on the side of the profi le (partly for

Learn More

HALFEN Anchor Channels | Ancon New Zealand

HALFEN HZA Toothed Anchor Channels. HALFEN HZA Toothed Anchor Channels. Ancon offers HALFEN HZA Toothed Anchor Channels for applications that require load capacity in the direction parallel to the channel axis.. The profiles HZA 53/34 and HZA 38/23 with welded anchors are approved by the Evaluation Service of the International Code Council (ICC-ES) for applications in seismic conditions.

Learn More

HALFEN HTA, HTA-CE, HZA, HZA Dynagrip - Yumpu

HALFEN Cast-in channels HTA and HZA. HALFEN Cast-in channels HTA-CE. Deutsch English. General Certificates of Approval by DIBt Berlin: Z-21.4-34 Z-21.4-145 Z-21.4-1691. HTA HZA HZA. DYNAGRIP. 41/22. 432-CPD-8394-01. Dimensioning acc. to CEN/TS 1992-4: 2009 applying to European Technical. Approval ETA-09/0339. 1. Type identification/ General ...

Learn More

HALFEN cast-in channels and attachment points as 3D BIM ...

Smart elevator planning with the following HALFEN cast-in channels and attachment points. Cold rolled cast-in channels (HTA-CE 28/15, 38/17, 40/25, 49/30, 54/33) Cold rolled serrated cast-in channels (HZA 41/22) Hot rolled cast-in channels (HTA-CE 40/22P, 50/30P, 52/34, 55/42, 72/48) Hot rolled serrated cast-in channels (HZA 29/20, 38/23, 53/34 ...

Learn More

HZA - DYNAGRIP Cast-In Channels - HALFEN

PRODUCT RANGES - Construction - Fixing systems - HZA - DYNAGRIP Cast-In Channels - Product information

Learn More

HALFEN - PRODUCT RANGES - Construction - Fixing systems ...

HTA-Cast-In Channels Curtain Wall Video HTA-Cast-In Channels Curtain Wall Mounting 5 MB, 640x480, 02.15min HTA-Cast-In Channels Installation Video HTA-Cast-In Channels Installation 14 MB, 1280x720, 01.55min HTA-Cast-in Channels Seat Installation Video HTA-Cast-In Channels Seat Installation 12 MB, 1280x720, 01.57min T-Bolt Video how a T-Bolt is installed 526 kB, 1000x750, 00.05min

Learn More

PDF HALFEN Cast-in channels ©2017 - ducsonco.com.vn

HALFEN Cast-in channels are regularly tested at German universities and independent material testing authorities. HALFEN HTA Channels were first awarded a National approval in 1976; the first ever for a cast-in channel. European Technical Approval ETA Obtained in 2010, this approval for HTA-CE Channels is valid unrestrictedly in

Learn More

Cast in Channel: Curtain Wall Channel & Brackets | Halfen ...

HALFEN DYNAGRIP Cast-In Channel is a new development for applications with high loads, where channel is cast in vertically. These high performance curtain wall channels and brackets can even absorb dynamic load components of up to 3 kN.

Learn More

PDF HALFEN Cast-in channels ©2016

HALFEN Cast-in channels are regularly tested at German universities and independent material testing authorities. HALFEN HTA Channels were first awarded a National approval in 1976; the first ever for a cast-in channel. European Technical Approval ETA Obtained in 2010, this approval for HTA-CE channels is valid unrestrictedly in

Learn More

HALFEN HZA-PS Cast-In Channels - HALFEN - PDF Catalogs ...

HALFEN HZA-PS CAST-IN CHANNELS Safety Relevant Aspects For applications in normal concrete constructions such as office buildings, schools, industrial buildings or in non-safety relevant areas of nuclear power plants HTA & HZA channels are officially approved, and recommended.

Learn More

PDF HALFEN HTA, HTA-CE, HZA Dynagrip - Assembly Instructions

HALFEN Cast-in channels HZA 2.1 1.1 Type identifi cation: On the inside of the profi le back. Additionally on the side of the channel. Select HALFEN Cast-in channel acc. to the design documents. HZA HZA 41/22 DYNAGRIP Z-21.4-145 Z-21.4-1691 Anchor Nail hole Combi strip fi ller HALFEN Cast-in channels HTA-CE Dimensioning according to

Learn More

Cast-in channels - Halfen

Halfen > Fixing systems > Cast-in channels 3D BIM & CAD models

Learn More

HTA-CE 54/33 - HALFEN Anchor channel HTA-CE 54/33 - Halfen ...

Halfen > Fixing systems > Cast-in channels > HTA-CE 54/33 - HALFEN Anchor channel HTA-CE 54/33 3D CAD models

Learn More

HALFEN - Introduction - HTA - Cast-In Channels - Fixing systems...

HTA - Cast-In Channels. Is an ideal basis for easy-to-install, dustfree and adjustable connections to concrete. HALFEN Framing Channels and HALFEN T-Bolts. Full flexibility in positioning and designing of the bolt connections. Large choice of corrosion protection for different requirements.

Learn More

PDF HALFEN Cast in channels

HALFEN cast-in channels HTA and HZA, in combination with HALFEN bolts, have been certified for use in fire-exposed structural elements. When the anchoring channels are installed in concrete components with a fire. resistance rating of F60 or F90 and the conditions according to section...

Learn More

Halfen - HTA Cast in Channels Stadium Seat Installation - YouTube

This is a demonstrating video for stadium seats installation. HALFEN Anchor Channels offer the ideal solution for easy-to-install, adjustable connections.

Learn More

PDF HALFEN Cast-in Channels | ETA-09/0339 ©2018

Halfen anchor channel HTA. Cast-in anchor channels. Halfen GmbH Abt. The European Technical Assessment is issued by the Technical Assessment Body in its official language. Translations of this European Technical Assessment in other languages shall fully correspond to the original issued...

Learn More